Our single-mode fiber-coupled picosecond-pulsed laser modules can provide short light pulses down to 50ps with a peak power up to 150mW in various wavelengths.

KEY SPECS

  • Laser diode gain-switching technology
  • Available wavelengths:  405, 445, 488, 520, 635 and 850 nm
  • Desktop-size-compact (135×110×50 mm)
  • Light weight (510g)
  • Standalone module, no computer connection required
  • FC/PC fiber-coupled laser diode
  • B2C or B2B selling options

Included in the price

– Wall-mount DC converter
– SMA coaxial cable
– USB type-C LVDS signal cable
– FC/PC MultiMode or SingleMode fiber patch cord

get a quote now

Main Function

MAIN tech-specs

  • Spectral width ± 10nm
  • Pulse duration down to 50ps (FWHM)
  • From 1KHz up to 80MHz repetition rate
  • 150mW pulse peak power
  • 1.5mW average CW power at 80MHz 
  • Single-mode fiber coupled module (FC/PC type)
  • External and internal digital sync trigger available  (LVTTL 2.5V @ 50Ohm and LVDS interface)

MAIN FEATURES

Our fiber-coupled picosecond-pulsed laser modules are engineered for fluorescence lifetime imaging and spectroscopy measurements. The lasers are available in the following wavelengths: 405, 445, 488, 520, 635 and 850 nm. Being standalone modules and requiring no computer connection to fully operate, our lasers can be deployed with minimal effort in different types of environments.

Compactness

Being only 135×110×50 mm in size and capable of delivering picosecond long pulses, our laser modules offer a good compromise between compactness and performance.

Laser power and pulse duration

The pulse duration (FWHM) can be as low as 50ps depending on the laser wavelength. While the pulse peak power is around 150mW yielding an average CW power of 1.5mW when operating at the maximum repetition frequency (80MHz).

Digital Knobs user interface

For fast and intuitive usage we designed the lasers as standalone modules requiring no computer interface. That is also why we equipped them with just 3 digital knobs for (1) controlling the functioning mode, either in PW or CW, (2) adjusting the laser power and (3) setting the repetition frequency as well the triggering modality, internal or external.

Laser triggering

Internal laser triggering is available from 80 down to 1.25MHz. The laser sync out is available in LVTTL @ 50Ohm or in LVDS over USB type-c connector (FLIM LABS proprietary interface).

External laser triggering is also possible using a dedicated knob functionality together with the sync in SMA connector port. External sync in signal has to be LVTTL @50Ohm and can be driven as low as 1KHz.

Interface and connection type

Our laser modules have SMA coaxial connectors for a LVTTL 50 Ohm sync in and sync out interface. The sync out SMA interface works in parallel with an orientation independent USB type-C port for communicating over a proprietary FLIM LABS LVDS protocol with the FLIM Data Acqusition Card.

Power Supply

The 2 options available for the power supply allow for flexible powering the laser modules via a 2.1/5.5 mm coaxial connector using a wall-mount DC converter or via jumper cables (recommended values are 9 V DC – 1 A max).

Fiber coupling

FC/PC fiber coupling offers flexibility for using our picosecond-pulsed laser modules for any type of applications, from fluorescence imaging to single-point fluorescence spectroscopy.

LEDs

Two LED lights are always there for providing real time feedback on the correct functioning of the laser module. One in the front panel for knowing when the laser is active (1), the second in the rear panel for making sure the module is working at its best (2).

B2C B2B Bespoke design

Since we engineer and develop all our products from scratch, our design can be customized. We could easily adjust the laser modules specifications based on your needs.

MAIN FEATURES

Our fiber-coupled picosecond-pulsed laser modules are engineered for fluorescence lifetime imaging and spectroscopy measurements. The lasers are available in the following wavelengths: 405, 445, 488, 520, 635 and 850 nm. Being standalone modules and requiring no computer connection to fully operate, our lasers can be deployed with minimal effort in different types of environments.

Compactness

Being only 135×110×50 mm in size and capable of delivering picosecond long pulses, our laser modules offer a good compromise between compactness and performance.

Laser power and pulse duration

The pulse duration (FWHM) can be as low as 50ps depending on the laser wavelength. While the pulse peak power is around 150mW yielding an average CW power of 1.5mW when operating at the maximum repetition frequency (80MHz).

Digital Knobs user interface

For fast and intuitive usage we designed the lasers as standalone modules requiring no computer interface. That is also why we equipped them with just 3 digital knobs for (1) controlling the functioning mode, either in PW or CW, (2) adjusting the laser power and (3) setting the repetition frequency as well the triggering modality, internal or external.

Laser triggering

Internal laser triggering is available from 80 down to 1.25MHz. The laser sync out is available in LVTTL @ 50Ohm or in LVDS over USB type-c connector (FLIM LABS proprietary interface).

External laser triggering is also possible using a dedicated knob functionality together with the sync in SMA connector port. External sync in signal has to be LVTTL @50Ohm and can be driven as low as 1KHz.

Interface and connection type

Our laser modules have SMA coaxial connectors for a LVTTL 50 Ohm sync in and sync out interface. The sync out SMA interface works in parallel with an orientation independent USB type-C port for communicating over a proprietary FLIM LABS LVDS protocol with the FLIM Data Acqusition Card.

Power Supply

The 2 options available for the power supply allow for flexible powering the laser modules via a 2.1/5.5 mm coaxial connector using a wall-mount DC converter or via jumper cables (recommended values are 9 V DC – 1 A max).

Fiber coupling

FC/PC fiber coupling offers flexibility for using our picosecond-pulsed laser modules for any type of applications, from fluorescence imaging to single-point fluorescence spectroscopy.

LEDs

Two LED lights are always there for providing real time feedback on the correct functioning of the laser module. One in the front panel for knowing when the laser is active (1), the second in the rear panel for making sure the module is working at its best (2).

B2C B2B Bespoke design

Since we engineer and develop all our products from scratch, our design can be customized. We could easily adjust the laser modules specifications based on your needs.

FULL SPECS

TechnologyLaser diode gain-switching
Operational modeCW or PW
Wavelengths405, 445, 488, 520, 635, 850nm
Spectral width± 10nm
PW Peak power150mW
FWHMDown to 50ps (depending on laser wavelength)
Average CW power when pulsing1.5mW at 80MHz repetition rate
CW power30mW
Repetition frequencyInternal triggering: 80, 40, 20, 10, 5, 2.5, 1.25 MHz

External triggering: from 1 KHz up to 80MHz
Fiber couplingSingleMode 4µm core
Fiber connectorFC type
Laser sync outLVTTL 4V@50 Ohm over the SMA connector

LVDS over the USB-type C ports (FLIM LABS proprietary interface)
Power supplyUSB powered or 9V DC-1 A max via the 2.1/5.5 mm coaxial connector
Laser sync in (digital modulation)LVTTL 4V@50 Ohm over the SMA connector
Power supply9V DC-1 A max via the 2.1/5.5 mm coaxial connector or via jumper cables
Dimensions135×110×50 mm
Weight510g

For more information
about the product,
for asking us a quote
or a demo unit,
write us.

We will answer you
as soon as possible.

    For more information
    about the product,
    for asking us a quote
    or a demo unit,
    write us.

    We will answer you
    as soon as possible.